FOR SALE-Massive Boat Bow/Winch Post

[BN]

I am having a big sort out and there is a lot.

I have a rather large (no massive) galvanised, bow and winch post to sell.

It was off my Hardy Cruiser I had and dragged around behind my Landy and regretfully had to sell. When I sold the boat, the trailer was not wanted as the rig was too big for the buyer to tow and handle.

Attached below are some pictures to give you an idea. The reach of the snubber (which is adjustable) is from 24 inches to 30 inches.

Too heavy to post, sorry will have to collect. The biggest I have seen on the net are still not as large or strong as this one.

The price is £85.00 please.

Contact via me the message board please on the site or add a comment here.

[Doughty Turbo]

Hi BN

Not interested in the post, but I think you renovated a Turbocraft recently.

I picked one up that needs a new windscreen.   Any chance of a lead on where I can get one made ?

[BN]

Hi BN

Not interested in the post, but I think you renovated a Turbocraft recently.

I picked one up that needs a new windscreen.   Any chance of a lead on where I can get one made ?

Sorry For the late reply, but Little Port Marine, near Ely in Cambridge make them to order. Here is a link: https://www.canalpages.co.uk/listings/littleport-boat-haven/

More info about littleportboathaven.co.uk
Boat windscreen,window rubber,boat seal,fender rubber,boat fendering by littleport boat haven
We Specialise in Marine Fender Rubber, Window Rubber Seals, Boat Windscreens, Boat cleaning products
marine windows, marine windscreens, wrap round windscreen, curved screen, curved windscreen, moulded screen, window rubbers, fender rubbers, rubber seals, boat fendering, boat rubber, cabin window rubber, boat window rubber, boat seals, marine seals, hatch seal, rubber extrusion, d rubber, d fendering, hollow rubber, solid rubber, rubber B fender, rubber D fender, end caps, rubber U fender, D fender rubber, B fender rubber.

+44 1223 655428

Hope it helps  BN

[Doughty Turbo]

You are a star !

Thank you.

Nearly back to the bare boat now.  Just the jet unit and a few bits of brass to remove. 

With everything off, it's going to be a complete sand down to see what we've got.

I'll let you know.

Thank you again.

[BN]

No problems. The hull is quite unique by its layup, so not like normal glass fibre. It is a thick hull, so should be ok, but use good filler for the type of layup of the boat. Ian at Coging knows all about them, he did a lot of work on mine: https://finedon.cylex-uk.co.uk/company/coging-motorsport-27656342.html

Hope that helps. BN